With the extension of the time of use, the computer quilting machine often appears all kinds of problems. Therefore, we should pay attention to the reasonable maintenance of the computer quilting machine and maintain its good working environment.
The working environment of computer quilting machine includes two aspects of physical environment and electrical environment. The former refers to the environment temperature, humidity, smoke and dust pollution and vibration and impact; the latter refers to static electricity, power line noise and radio frequency interference. If environmental factors are ignored. it may lead to abnormal work in the system.
1, computer quilting machine environment temperature and humidity: computer requirements for temperature and humidity are not high. as long as the user feels comfortable environment, the computer can adapt.
The temperature is too low. Some parts may not work normally. This is not a computer failure. Because the temperature is too high and the computer is difficult to heat, the components will malfunction due to overheating.
The relative temperature varies according to the geographical location. Too dry air may cause electrostatic accumulation and damage the integrated circuit.which is bad for both people and machines. Too humid air will cause the internal chip of the computer to cause oxidation corrosion, resulting in the bad or short circuiting of the contactor.
2, ventilation: the computer has certain requirements for ventilation. The place where the computer is placed is best ventilated and well ventilated.
3, dust: room environment is the main factors to ensure normal operation of the machine, there must be some such as dust-proof equipment, cleaning equipment, slippers, bonnet etc..
The keyboard, the floppy drive and other equipment all require the clean environment, and the dust is less. The keyboard after the trial, with a plastic cover cover. The floppy drive can be cleaned regularly with the cleaning disk, and the floppy disk drive can be opened directly (the effect is better), but do not touch the magnetic head. There is dust on the display and can be removed with soft cloth. Remember not to use wet cloth to dust the computer when it works. In addition, you can also open the chassis shell with brush and vacuum cleaners to remove internal dust, computer does not work, with the host and display cover cloth cover. (Note: there must be a computer system division or a person who will be used to open the chassis.)
4, power line noise and radio frequency interference: when the grid connected with other heavy loads, such as electric shock, will cause the power supply voltage fluctuation or peak - surge voltage, peak voltage is too high will damage the computer, so be careful not to connect with a computer in the network had a heavy load, the host computer must be connected good. (if the voltage is not stable, users need to purchase 3KV power supply): electromagnetic wave radio frequency interference and sometimes even mobile phone emission will cause interference on the system, or the system deadlock, change direction may be placed computer to solve the problem, the best solution must use good shielding and grounding.